Condens R Hot water units Sonniger
Hot water unit HEATER is made of unique construction material with lifetime warranty. It makes them significantly lighter and prolongs their life span. Integrated heat exchangers are considered top class in Europe. Thanks to adjusted range of parameter, they are suitable for connection to most of existing sources of heat.
Kód produktu: CONDENS R
I am interested in the productAdvantages of heater Condens R:
- Reliable performance with an air flow of up to 4 900 m3/h
- Heating power from 5 to 70 kW
- 3 stage fan already in standard version
- Original semi-automatic or fully automated controllers
- Lightweight construction and low operating weight
- Specially adjustable slats for precise direction of blown air
- Modern and aesthetic design
| CR ONE | CR R1 | CR R2 | CR R3 | |
| List price, Eur | 320 | 398 | 459 | 523 |
| Range of heating power* [kW] | 5 - 25 | 10 - 35 | 15 - 50 | 20 - 70 |
| Water temperature drop (70/50 ℃) / Δt air temperature rise** [kW/℃] | 13 kW / 25 °C | 16 kW / 13 °C | 26 kW / 22 °C | 35 kW / 34 °C |
| Number of heating rows | 2 | 1 | 2 | 3 |
| Max. air flow [m3/h] | 1 600 | 3 900 | 3 350 | 2 950 |
| Air temperature rise [°C] | 32 | 14 | 29 | 29 |
| Max. operating pressure [Mpa] | 1,6 | 1,6 | 1,6 | 1,6 |
| Max. air throw [m] | 14 | 27 | 25 | 24 |
| Connection diameter [inch] | 1/2 | 3/4 | 3/4 | 3/4 |
| Connection parameters [W/Hz] 230/50 | 124W / 0,58A | 250W / 1,08A | 250W / 1,08A | 250W / 1,08A |
| Fan motor power [kW] | 0.124 | 0.25 | 0.25 | 0.36 |
| Fan speed [obr/min] | 1 400 | 1 350 | 1 350 | 1 400 |
| IP coverage | IP54 | IP54 | IP54 | IP54 |
| Noise level [dB(A)] | 52 | 62 | 60 | 60 |
| Weight without water / with water [kg] | 9,6 / 10,7 | 10,8 / 11,9 | 12,7 / 14,8 | 14,5 / 16,9 |
* maximum heat power for temperature gradient 120/90 °C and inlet air temperature 0 °C, third speed.
* minimum heat power for temperature gradient 50/30 °C and inlet air temperature 0 °C, third speed.
** for inlet air temperature 0 °C
Basic elements of hot water unit CONDENS R
- the cover is made of expanded polypropylene EPP
- adjustable air flow using slats
- mounting bracket
- 3-speed axial fan; diameter 450mm, the fan is protected from direct access to the rotating parts thanks to the built-in safety net
- the heat exchanger (Cu/Al) is made of copper tubes located in a ribbed aluminum block with a copper cap with ½ ", ¾" screwing. Outlets are equipped with caps that allow venting and draining of liquid
Dimensions of hot water heaters
Installation of hot water heaters
The heaters are placed on the wall or under the ceiling in a mounting bracket. Another option is to use screws (in-house) or on the supporting structure - you can freely design the shapes and dimensions of the supporting structures while complying with the strength requirements. The unit can be installed on the wall using a bracket at an angle of 0°, 30° or 60°.
Automatic control of hot water heaters
The heater can include an automation set (230V mains power supply), the options are:
- Panel COMFORT, 3-speed fan switch and room thermostat at the same time,
- Panel COMFORT can regulate up to 3 R series heaters or 6 HEATER CR ONE heaters
- two-way valve with servo drive – mounted at the outlet of the heater
- Panel INTELLIGENT – electronic control panel for speed control and BMS communication
- Panel INTELLIGENT panel can control up to 2 R series heaters and 4 HEATER CR ONE heaters
- Splitter MULTI 6 controls up to 6 HEATER heaters or 12 HEATER ONE from one Panel COMFORT or Panel INTELLIGENT